PAIRING RADIO TO SCBA (G1)

1. Press and hold green button until battery symbol is displayed
2. Press red button – RFID will display
3. Rub FOB onto RFID, located on the backplate of harness (left side)
4. RFID indicator on Control Module will turn from “red” to “green”
5. Pressurize system 
6. Turn desired radio “ON”
7. Radio will display “pair request”, the button on the left side of the faceplate on the radio (1 dot)
8. Click “OK”, the button on the left side of the faceplate on the radio (1 dot)
9. Radio will display “connected” and then “disconnected”

10.The radio and SCBA will reconnect once you don mask, attach the second stage regulator and take a breath

UNPAIRING RADIO TO SCBA (G1)

1. Remove battery from SCBA harness
2. Wait 5 seconds 
3. Replace battery in SCBA harness

REMOVE PAIRING FROM RADIO

1. Press “BT”, the button on the right side of the faceplate on the radio (3 dots)
2. Scroll down to “Devices” and press “Sel”, the button on left side of faceplate on the radio (1 dot)
3. Press “Clear”, the middle button on the faceplate of the radio (2 dots)
4. Press “Yes”, the button on the left side of the faceplate on the radio (1 dot)
5. Press “Back” and then “Exit” to get to the main radio screen